OME 506 Tankless (Instantaneous)Point of use Water Heater
Fuel type:	Propane (LPG) or Natural Gas (NG)
Exhaust:	Normal Vertical Draft
Controls:	Mechanical Lever to limit the maximum water flow for overall water volume. The volume is controlled by your faucets.
Gas :	Manual Mechanical Knob to control the maximum temperature. A hydronic valve controls the necessary gas to maintain the desired temperature.
Power:	Min 14,000 BTU Max 42,950 BTU
Efficiency:	82% to 85% (depending on the volume of water used in one cycle, the longer the cycle, the higher the efficiency)
Capacity:	Min: 0.5 Gallons (One of the lowest in the industry!) Max: 1.75 Gallons of hot water at 70F temp increase (combined with cold water at faucet, it's enough hot water supply for a legal shower.)
Ignition:	Electronic two stage control, Advanced Ion Technology. No pilot light to waste fuel! No electrical outlet needed. The unit is powered by two D Cell batteries.
Safety:	- The ignition is computer controlled. If any misfires occur, the units detects this malfunction and shuts down to prevent damage. - The unit an unit temperature sensors, which will shutdown the unit in case it overheats. - The water intake is fitted with an overpressure release valve and a screen filter, both of which protect your investment. - The entire heat exchanger core is manufactured out of oxygen free copper for better heat conductivity and longer life. The entire core is not soldered but is welded for long life and integrity under heat differences - The entire burner is manufactured out of stainless steel. - There is no lead in this unit. - The exhaust flue collector is manufactured from oxygen free steel, which will eliminate any paint peeling or bubbling, protecting the beauty of your investment .
Dimensions:	Water inlet : ½ inch Water outdlet: ½ inch Gas inlet : ½ inch Flue Diameter: 4 inches Unit weight: 14.5 pounds Complete unit: 18' X 11.5' X 5' Transport box: 22' X 14' X 7'